Enhanced Grain Smoked Oak - 126mm

Following extensive trials, we recommend and supply Durafix® stainless steel screws, designed specifically for Millboard decking, which is a requirement of our limited warranty.rnrnThere’s no need to pre-drill or countersink Millboard decking. The unique Lastane® material coating flexes back over the screw-heads, leaving a minimal witness mark. This may be more visible in lighter colours, such as Golden Oak. If you find that some screws leave larger witness marks, please contact Millboard. Our decking installation guides should be followed at all times to achieve the best finish.

Millboard decking is designed and manufactured to mimic the beauty of real oak without the drawbacks of natural materials. Our boards are hand-coloured to have natural variation, though buying all the Millboard decking you need at the same time should help to ensure that the colour is reasonably consistent.rnrnWe recommend laying out and mixing the boards before installation to ensure the deck has the desired overall variance, showcasing the product’s character and individuality.rnrnMake sure to explore different shades to find the right colour for your outdoor space.

As Millboard is made from a resin-mineral composition (100% wood-free), it is stable in comparison to wood or wood-based composites. The amount of movement that is acceptable is up to 0.2%. We recommend a 4mm gap between the sides of the Enhanced Grain’s boards and a 1mm gap between the ends of the boards. A 10mm gap should be left between the boards and any solid surface to aid drainage.

There will always be a slight variance in the board’s dimensions, due to the hand-moulding process from natural oak masters.rnDespite this, we calibrate the boards to maintain as consistent a profile as possible. The manufacturing tolerances are:rnu003culu003ern tu003cliu003eWidth: ± 3mmu003c/liu003ern tu003cliu003eLength: ± 5mmu003c/liu003ern tu003cliu003eThickness: ± 2mm.u003c/liu003ernu003c/ulu003ernWhen working with boards, packers may be required to create a flush finish between them.

As Millboard is made from a resin-mineral composition (100% wood-free), it is stable in comparison to wood or wood-based composites. The amount of movement that is acceptable is up to 0.2%. We recommend a 4mm gap between the sides of the Enhanced Grain’s boards and a 1mm gap between the ends of the boards. A 10mm gap should be left between the boards and any solid surface to aid drainage.