Board & Batten+ Limed Oak

Our Shadow Line+ and Board & Batten+ cladding boards have been tested to BS EN 13501-1 and have a classification of D-s3, d0.

The responsibility for the cladding’s suitability in the required location is to be determined by a certified building professional (building control, building insurance, fire officer, etc). Millboard will not be held responsible for incorrect specification, application, or product installation in areas not in accordance with government guidance, in the UK or abroad. Current guidance should be gained from the government website relating to the geographical project location.

There will always be a slight variance in the board’s dimensions due to the fact that we mould from natural oak, and due to the pressure of the moulding process. Despite this, we calibrate the boards to maintain as consistent a profile as possible. The manufacturing tolerances are: Width: ± 3mm. Length: ± 5mm. Thickness: ± 2mm.When working with the boards, a level may be required to help keep the boards running upright or level. In order to achieve straight and consistent 5-6mm gapping between the shadow Line+ boards, it may be necessary to use our Millboard Multi-Spacers during the installation process.

Envello cladding is extremely versatile and can be used for most low-level cladding areas (subject to building control). It can be used for cladding on low-level residential and commercial buildings, garden rooms, home offices, furniture, soffits and fascia, outdoor kitchens and more. Envello can be used as the decorative face for most outdoor designs, as long as it is fixed to a structural element. All areas subject to the relevant government regulations/building standards.

The responsibility for the decking and cladding’s suitability in the required location is to be determined by a certified building professional (building control, building insurance, fire officer, etc). Millboard will not be held responsible for incorrect specification, application, or product installation in areas not in accordance with government guidance, in the UK or abroad. Current guidance should be gained from the government website relating to the geographical project location.

Board and Batten composite cladding is typically installed as vertical boards for a clean aesthetic and elongated look. However, it is also suitable for horizontal applications.rnrnDue to the composition of the boards, they are ideal for high moisture and humid environments, such as the UK. They also have good insulation properties, helping to improve the wall thermal properties.

The deep grooves of the batten cladding use light and shadow to create a striking linear design which lengthens exterior walls. Typically, it is used for farmhouses and barns, yet it complements Scandinavian architecture with tall gable roofs.